Quick Reference Guide

Output
<module> configuration was initiated successfully. It may take several minutes to
complete.
Example
• Set member name, member ip, member netmask, member gateway with new
group name, group ip, group password, admin password selecting fabric A on
server-1:
racadm setarraycfg -m server-1 -n cmc-col
192.168.1.233 255.255.255.0 192.168.1.0 -e 0 -g cmc-
array-grp 192.168.1.10 <password> -f A
• Set member name, member ip, member netmask, member gateway with
existing group name, group ip, group password selecting fabric B on server-1:
racadm setarraycfg -m server-1 -n cmc-col
192.168.1.233 255.255.255.0 192.168.1.0 -e 1 -g cmc-
array-grp 192.168.1.10 <password> -f B
• Select different fabric type:
racadm setarraycfg -m server-3 -f A
setassettag
Description Sets the N-byte ASCII asset tag for the chassis.
This subcommand is applicable only for CMC.
To use this subcommand, you must have Administrator
privilege.
Synopsis
racadm setassettag -m chassis <asset tag>
Input -m <
module
> — Specifies the module whose asset tag you want to set.
Legal value: chassis
You can obtain the same output if you do not include this option, as there is only one legal
value.
<
assettag
> is a maximum of 64 non-extended ASCII characters.
Example
• racadm setassettag -m chassis 783839–33
• racadm setassettag 783839–33
The asset tag was changed successfully.
setchassisname
Description Sets the name of the chassis in the LCD.
This subcommand is applicable only for CMC.
To use this subcommand, you must have Administrator
privilege.
Synopsis
racadm setchassisname <name>
NOTE:
Chassisname is a maximum of 64 non-
extended ASCII characters.
Example
racadm setchassisname dellchassis-1
The chassis name was set successfully.
106