Quick Reference Guide

• Configuration of CMC to a static IPv6 address:
racadm setniccfg -m chassis -s -6 2001:DB8::2 64
2001:DB8::1
• Configuration of server to use stateless autoconfiguration address:
racadm setniccfg -m server-1 -d -6
• Configuration of VLAN id and priority for a switch:
racadm setniccfg -m switch-1 -v 1000 7
• Removal of VLAN configuration from a switch:
racadm setniccfg -m switch-1 -v
setractime
Description Sets the date and time on the CMC.
To use this subcommand, you must have Administrator
privilege.
This command is applicable only for CMC.
Synopsis
racadm setractime -d
<YYYYMMDDhhmmss.mmmmmmsoff>
racadm setractime -l <YYYYMMDDhhmmss>
racadm setractime -z ?|<timezone>|
<timezone-prefix>*
Input
• -d — Sets the time in the string
YYYYMMDDhhmmss.mmmmmmsoff, where:
– YYYY is the four digit year
– MM is the month
– DD is the day
– hh is the hour
– mm is the minute
– ss is the second
– mmmmmm is the number of microseconds
– s is a + (plus) sign or a - (minus) sign,
which indicates the sign of the offset.
– off is the offset in minutes
NOTE:
The off is the offset in minutes from GMT
and must be in 15-minute increments. The timezone is
represented as an offset from GMT, and the clock
does not automatically adjust to daylight savings time
(for '-d' option).
• -z <
zone > - Sets the time zone by name or index,
or lists possible time zones. For example,
PST8PDT (Western United States), 294 (Seoul),
344 (Sydney). < zone > may be:
– <
? > lists the major timezone names/
prefixes.
110