Quick Reference Guide

Example
racadm sslkeyupload -t 1 -f c:
\sslkey.txt
sslresetcfg
Description Restores the web-server certificate to factory default and
restarts web-server. The certificate takes effect 30
seconds after the command is entered.
To use this subcommand, for CMC you must have Chassis
Configuration Administrator privilege. For iDRAC, you must
have
Configure iDRAC privilege.
Synopsis
racadm sslresetcfg
Example
$ racadm sslresetcfg
Certificate generated successfully and
webserver restarted.
NOTE:
For more information on managing SSL certificates, see the “Securing CMC Communications Using SSL and
Digital Certificates” section in the Dell Chassis Management Controller User Guide .
systemconfig
Description Enables you to backup and restore for iDRAC configurations and firmware.
This subcommand is applicable only for iDRAC.
NOTE:
• To use this subcommand you require the Server Profile Export and Import
license.
• Backup is licensed but restore is not licensed (Enterprise).
• If Lifecycle Controller is “disabled”, then the attempt to start a restore
operation is unsuccessful.
• If CSIOR is disabled, then the system inventory may not be current during
the backup operation. An appropriate warning message is reported.
Synopsis
• racadm systemconfig backup -f <filename> <target> [-
n passphrase ] [-l <location> -u <
user name> -p
<password>] [--vFlash]
• racadm systemconfig restore -f <filename> <target>
[-n passphrase ] [--nopreserve] [-l <location> -u
<user name> -p <
password>] [--vFlash]
Input
• -n — A passphrase used to encrypt or decrypt the configuration data. This is
optional.
• -l — Network share location, can be either CIFS or NFS.
• -f — Image file name.
• -u — Username for the remote share access.
• -p — Password for the remote share access.
• --vFlash — Choose vFlash SD as target location for Backup. <filename is
not required for this target type.
119