Quick Reference Guide

3
iDRAC and CMC Property Database Group and
Object Descriptions
The iDRAC and CMC property database contains the configuration information for iDRAC and CMC. Data is organized by
associated object, and objects are organized by object group. The IDs for the groups and objects that the property
database supports are listed in this section for iDRAC Enterprise on Blade Servers, iDRAC Enterprise or Express on Rack
and Tower Servers and CMC.
Use the group and object IDs with the RACADM subcommands to configure iDRAC and CMC.
NOTE:
You can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option.
NOTE:
Racadm sets the value of objects without performing any functional validation on them. For example,
RACADM allows you to set the Certificate Validation object to 1 with the Active Directory object set to 0, even
though Certificate Validation can happen only if Active Directory is enabled. Similarly, the cfgADSSOEnable object
can be set to 0 or 1 even if the cfgADEnable object is 0, but it takes effect only if Active Directory is enabled.
All string values are limited to displayable ASCII characters, except where otherwise noted.
Displayable Characters
Displayable characters include the following set:
abcdefghijklmnopqrstuvwxwz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789~`!@#$%^&*()_+-={}[]|\:";'<>,.?/
The following table provides an overview of the object groups applicable for iDRAC Enterprise on Blade Servers, iDRAC
on Rack and Tower Servers, and CMC.
Subcommand iDRAC on Blade Servers iDRAC on Rack and Tower
Servers
CMC
idRacInfo
Yes Yes Yes
cfgLanNetworking
Yes Yes Yes
cfgRemoteHosts
Yes Yes Yes
cfgUserAdmin
Yes Yes Yes
cfgEmailAlert
Yes Yes Yes
cfgSessionManagement
Yes Yes Yes
cfgSerial
Yes Yes Yes
cfgOobSnmp
Yes Yes Yes
cfgTraps
No No Yes
cfgRacTuning
Yes Yes Yes
129