Quick Reference Guide

cfgRhostsSyslogEnable (Read/Write)
Description Enables or disables remote syslog to allow the RAC and
SEL logs to be written to up to three remote syslog
servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read/Write)
Description Remote syslog port number to use for writing the RAC and
SEL logs to a remote syslog server.
For CMC, this setting takes effect only if the
cfgRhostsSyslogEnable parameter is set to 1 (enabled).
Legal Values 10 — 65535
NOTE:
For CMC, the following port numbers are
reserved and cannot be used: 21, 68, 69, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogServer1 (Read/Write)
Description Specifies the first of three possible remote syslog servers
to store the RAC and SEL logs.This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
• For iDRAC: String from 0 to 63 characters.
• For CMC: Valid hostname or IPv4 or IPv6 address.
Default <
blank >
cfgRhostsSyslogServer2 (Read/Write)
Description Specifies the second of three possible remote syslog
servers to store the RAC and SEL logs.. This property is
only valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
• For iDRAC: String from 0 to 63 characters.
• For CMC: Valid hostname or IPv4 or IPv6 address.
Default <
blank >
144