Quick Reference Guide

cfgRhostsSyslogServer3=cfgRhostsSyslogPowerLoggingEnabled=1
cfgRhostsSyslogPowerLoggingInterval=5
cfgUserAdmin
This group provides configuration information about the users who are allowed to access iDRAC or CMC through the
available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an individual user.
NOTE:
In the current CMC firmware version, the objects cfgUserAdminEnable and cfgUserAdminPrivilege are
interrelated; changing the value of one property causes the value of the other property to change. For example, if a
user does not have login privilege, the user is disabled by default. When you enable the user by changing the value
of UserAdminEnable to 1, the right most digit of the UserAdminPrivilege also becomes 1. On the other hand, if you
change the right most digit of the UserAdminPrivilege to 0, the value of UserAdminEnable becomes 0.
Use this object with the config or getconfig subcommands. You must supply an index group number to use these
commands as follows: -i <index group>
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
NOTE:
For CMC, you can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option.
The following sections provide information about the objects in the cfgUserAdmin group.
cfgUserAdminIndex (Read Only)
Description The unique index of a user.
For CMC, the index number is used to specify a unique
group name. Only valid for indexed groups.
Legal Values
For iDRAC: This parameter is populated based on
the existing instances.
For CMC: The parameter is specified by a decimal
integer from 1–16.
Default <
index of the instance
>
cfgUserAdminIpmiLanPrivilege (Read/Write)
Description The maximum privilege on the IPMI LAN channel.
This object property is specific to iDRAC.
Legal Values
2 (User)
3 (Operator)
4 (Administrator)
15 (No access)
Default
4 (User 2)
15 (All others)
146