Quick Reference Guide

• In case of iDRAC Enterprise on Blade Servers: Session timed out.
Closing the session.
After the message is displayed, the system returns to the shell that generated the
Secure Shell session.
Legal Values
• 0 (No timeout)
• 60 – 10800
NOTE:
If 0 (no timeout), the network connection does not send keep alive packets
to probe the client. Otherwise, keep alive packets are sent to guarantee that the
client is responding.
Default
• For iDRAC on Rack and Tower Servers: 300
• For iDRAC Enterprise on Blade Servers and CMC: 1800
cfgSsnMgtTelnetIdleTimeout (Read/Write)
Description Defines the Telnet idle timeout. This property sets the amount of time in seconds that a
connection is allowed to remain idle (there is no user input). The session is cancelled if the
time limit set by this property is reached. Changes to this setting do not affect the current
session (you must log out and log in again to make the new settings effective.)
An expired Telnet session displays the following error message:
• In case of iDRAC on Rack and Tower Servers: Connection timed out
• In case of iDRAC Enterprise on Blade Servers: Session timed out.
Closing the session.
After the message is displayed, the system returns you to the shell that generated the Telnet
session.
Legal Values For iDRAC:
• 0 (No timeout)
• 60– 10800
NOTE:
If 0 (no timeout is specified), the network connection does not send keep
alive packets to probe the client. Otherwise, keep alive packets are sent to
guarantee that the client is responding.
Default
• For iDRAC on Rack and Tower Servers: 300
• For iDRAC Enterprise on Blade Servers and CMC: 1800
cfgSerial
This group contains configuration parameters for iDRAC or CMC services. One instance of the group is allowed.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgSerial group.
NOTE:
The cfgSerial object group is applicable for iDRAC Enterprise on Blade Servers for only two properties—
cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.
152