Quick Reference Guide

cfgSerialBaudRate (Read/Write)
Description Sets the baud rate on iDRAC or CMC serial port.
Legal Values
• For iDRAC: 9600, 28800, 57600, 115200
• For CMC: 2400, 4800, 9600, 19200, 28800, 38400,
57600,115200
Default
• For iDRAC: 57600
• For CMC: 115200
cfgSerialConsoleEnable (Read/Write)
Description Enables or disables the RAC or CMC serial console interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
• For iDRAC: 0
• For CMC: 1
cfgSerialConsoleQuitKey (Read/Write)
Description For iDRAC:
This key or key combination terminates Virtual Console text for iDRAC when using the
console com2 command.
The cfgSerialConsoleQuitKey value can be represented by one of the following:
• Decimal value — For example, 95
• Hexadecimal value — For example, 0x12
• Octal value — For example, 007
• ASCII value — For example, ^a
ASCII values may be represented using the following Escape Key codes:
^ followed by any alphabet (a-z, A-Z) ^ followed by the listed special characters: [ ] \ ^
_
For CMC:
This key specifies the character that aborts the serial text console connect (or racadm
connect) command.
NOTE:
The CTRL key is represented by using the ^ (carat) character.
NOTE:
The CTRL key does not generate a character by itself, but must be struck
simultaneously with another key to generate a character.
For example, striking both the CTRL key and the \ key simultaneously (rather than
sequentially) is denoted as ^\.
153