Quick Reference Guide

Configuration options: The value must start with the ^ character, and be followed by
one of the characters— a-z, A-Z, [, ], \
Legal value: String of up to 4 characters
Default:
• For iDRAC: <
Ctrl >< \ >
• For CMC: ^\
NOTE:
For information on using RACADM commands for special characters, see
Guidelines to Quote Strings Containing Special Characters
cfgSerialConsoleIdleTimeout (Read/Write)
Description The maximum number of seconds to wait before an idle
serial session is disconnected.
Legal Values
• 0 = No timeout
• 60 – 1920
Default
• For iDRAC: 300
• For CMC: 1800
cfgSerialConsoleNoAuth (Read/Write)
Description Enables or disables the RAC or CMC serial console login
authentication.
Legal Values
• 0 (enables serial login authentication)
• 1 (disables serial login authentication)
Default 0
cfgSerialConsoleCommand (Read/Write)
Description Specifies a serial command that is executed after a user
logs into the serial console interface.
Legal Values
• For iDRAC: A string of up to 128 characters.
• For CMC: A string representing a valid serial
command. For example, connect server-1.
Default <
blank >
cfgSerialConsoleColumns
Description Specifies the number of columns in the terminal window
command line connected to the serial port. You must log
out, then log in again for the changes to take effect.
This object property is applicable only for CMC.
154