Quick Reference Guide

cfgSerialTelnetEnable (Read/Write)
Description Enables or disables the Telnet console interface on iDRAC
or CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgOobSnmp
This group contains parameters to configure the SNMP agent and trap capabilities of iDRAC or CMC. One instance of
the group is allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2, and the Dell enterprise-specific MIB.
This group is not applicable for iDRAC on Rack and Tower Servers.
For CMC, use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
NOTE:
For CMC, you can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read/Write)
Description Specifies the SNMP Community Name used for SNMP
traps. The community string acts as a password shared
between different hosts over the network. This community
string value must match with that of the other hosts for
any kind of communication through SNMP.
Legal Values A string of up to 31 characters.
Default public
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpAgentCommunity=public
cfgOobSnmpAgentEnable (Read/Write)
Description Enables or disables the SNMP agent in iDRAC or CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
156