Quick Reference Guide

• 0 — Disabled (launch iDRAC using IP address)
Default 0 — Disabled
cfgRacTuneCtrlEConfigDisable
Description Enables or disables the ability of the local user to
configure iDRAC from the BIOS POST option-ROM.
This object is applicable only for iDRAC on Rack and
Tower Servers and not for iDRAC Enterprise on Blade
Servers or CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRacTuneHttpPort (Read/Write)
Description Specifies the port number to use for HTTP network
communication with iDRAC or CMC.
Legal Values 10 – 65535
NOTE:
For CMC, the following port numbers are
reserved and cannot be used: 21, 68, 69, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, 60106.
Default 80
cfgRacTuneHttpsPort (Read/Write)
Description Specifies the port number to use for HTTPS network
communication with iDRAC or CMC.
Legal Values 10 – 65535
NOTE:
For CMC, the following port numbers are
reserved and cannot be used: 21, 68, 69, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, 60106.
Default 443
cfgRacTuneIpRangeEnable (Read/Write)
Description Enables or disables the IPv4 Address Range validation
feature of iDRAC or CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
159