Quick Reference Guide

cfgVirtualBootOnce (Read/Write)
Description Enables or disables the Virtual Media Boot Once feature
of iDRAC.
If this property is enabled when the host server is
rebooted, this feature attempts to boot from the virtual
media devices—if the appropriate media is installed in the
device.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgVirMediaFloppyEmulation (Read/Write)
Description When set to 0, the virtual floppy drive is recognized as a
removable disk by Windows operating systems. Windows
operating systems assigns a drive letter that is C: or higher
during enumeration. When set to 1, the Virtual Floppy drive
is seen as a floppy drive by Windows operating systems.
Windows operating systems assigns a drive letter of A: or
B:.
NOTE:
Virtual Media has to be reattached (using
cfgVirMediaAttached) for this change to take effect.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgSDWriteProtect (Read Only)
Description Displays if the physical write protect latch on the SD card
is enabled or disabled.
NOTE:
This command is deprecated from iDRAC 1.5
and CMC 3.0 releases onwards. The functionality of
this command is now covered by
cfgVFlashSDWriteProtect. While execution
of the cfgSDWriteProtect command is
successful, it is recommended to use the
cfgVFlashSDWriteProtect command. For
more information, see "cfgVFlashSDWriteProtect" on
page 132.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
167