Quick Reference Guide

cfgChassisInPowerServerAllocation (Read Only)
Description Indicates (in watts) the cumulative power allocated to servers. There is no default as
this parameter is very specific to the particular customer configuration.
Legal Values None
Default None
cfgChassisInfrastructureInPowerAllocation (Read Only)
Description Indicates the estimated cumulative DC output power consumption (in watts),
determined from a field replaceable unit (FRU) on the hardware modules in the chassis.
Legal Values None
Default None
cfgChassisTotalInPowerAvailable (Read Only)
Description Indicates the amount of power (in watts) available for use by the chassis.
Legal Values None
Default None
cfgChassisStandbyInPowerCapacity (Read Only)
Description Indicates the amount of power (in watts) available for powering up any hardware
modules that are either added to the chassis or powered up (if they are already
present in the chassis).
Legal Values None
Default None
cfgChassisPowerClear (Write Only)
Description Resets
cfgChassisMinPower
and cfgChassisMaxPowerCapacity, when set to 1.
Legal Values None
Default None
cfgChassisPowerClearTimestamp (Read Only)
Description Time stamp when
cfgChassisMinPower and cfgChassisMaxPowerCapacity were
reset.
Legal Values None
Default None
192