Quick Reference Guide

cfgIpmiPetIndex (Read Only)
Description Unique identifier for the index corresponding to the trap.
Legal Values 1 - 4
Default The index value of a specific platform event trap.
cfgIpmiPetAlertDestIpAddr (Read/Write)
Description Specifies the destination IPv4 address for the trap
receiver on the network. The trap receiver receives an
SNMP trap when an event is triggered on the managed
server.
Legal Values A string representing a valid IPv4 address. For example,
192.168.0.67.
Default 0.0.0.0
cfgIpmiPetAlertEnable (Read/Write)
Description Enables or disables a specific trap.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgUserDomain
This group is used to configure the Active Directory user domain names. A maximum of 40 domain names can be
configured at any given time. This group is applicable only for iDRAC.
The following sections provide information about the objects in the cfgUserDomain group.
cfgUserDomainIndex (Read Only)
Description Represents a specific domain.
Legal Values 1 – 40
Default The index value.
cfguserdomainname
Description Specifies the Active Directory user domain name.
Legal Values A string of up to 254 ASCII characters
Default <
blank >
198