Quick Reference Guide

For using single quotation marks:
• No character escaping is necessary.
• A single quotation mark cannot be used even with a back slash escaped.
NOTE:
An empty string may be specified as either "" (using double quotation marks) or '' (using single quotation
marks).
"?"and "?<subcommand>"
Description
Displays all the subcommands you can use with the RACADM command and a one-line
description about each subcommand.
? followed by <
subcommand
> displays the syntax for the specified command.
To use this subcommand, you must have CMC Login User privilege.
You can also use the
help and help < subcommand > commands to obtain the same
information.
This subcommand is applicable only for CMC.
Synopsis
racadm ?
racadm ? <subcommand>
Input NA
Output NA
Example for RACADM ?
The following output example shows only part of the actual output for the racadm ? command. Descriptions shown in
this example may vary slightly from the descriptions in your racadm session.
racadm ?
help -- list racadm subcommand description
help <subcommand> -- display usage summary for a subcommand
? -- list racadm subcommand description
? <subcommand> -- display usage summary for a subcommand
arp -- display the networking arp table
chassisaction -- execute chassis or switch power-up/down/cycle or KVM
powercycle
closessn -- close a session
clrraclog -- clear the CMC log
clrsel -- clear the System Event Log (SEL)
cmcchangeover -- changes the redundant state of the CMC from active to
standby and vice versa
config -- modify CMC configuration properties
connect -- connect to switch or blade serial console
deploy -- deploy blade or IOM by specifying required properties
feature -- display features active on the chassis / feature
deactivation
featurecard -- feature card status and list the available features
fwupdate -- update the firmware on a CMC, server, IOM inf, or KVM
getactiveerrors -- display CMC active errors
getassettag -- display asset tag
getchassisname -- get the chassisname
getconfig -- display CMC configuration properties
getdcinfo -- display general I/O module and DC configuration information
getfanreqinfo -- display fan request information for Servers and Switches
getflexaddr -- display Flexaddress enablement status for all slots and
fabrics.
getioinfo -- display general IO information and stack information
20