Quick Reference Guide

You must have Administrator privileges to modify the value
for this object.
Legal Values 0W: For platforms that do not support PCIe cards.
100W - 500W: For platforms that support PCIe cards.
Default 0: For platforms that do not support PCIe cards.
500W: For platforms that support PCIe cards.
cfgKVMInfo
This group is used to display information for and configure the iKVM.
Use this object with the config or getconfig subcommands.
This group is applicable only for CMC.
To use this object property, you must have Chassis Configuration Administrator privilege.
cfgKVMAccessToCMCEnable
Description Enables or disables the Dell CMC Console access on the
iKVM.
Legal Values
• 1 (enable)
• 0 (disable)
Default None
cfgKVMFrontPanelEnable
Description Enables or disables front panel access on the iKVM.
Legal Values
• 1 (enable)
• 0 (disable)
Default None
Example
racadm getconfig -g cfgKVMInfo
cfgKVMAccessToCMCEnable=1
cfgKVMFrontPanelEnable=1
cfgAlerting
This group enables or disables SNMP event trap alerting and sets the event filter.
This group is applicable only for CMC.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
208