Quick Reference Guide

The cfgServerPowerSupply
object group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC
Enterprise on Blade Servers.
NOTE:
The getconfig subcommand always shows eight cfgServerPowerSupply indexes, even if two power supplies
are installed in the system or the system supports a maximum of two power supply units. For the uninstalled and
unsupported units, all the objects in the cfgServerPowerSupply group displays a value of 0.
The following sections provide information about the objects in the cfgServerPowerSupply group.
cfgServerPowerSupplyIndex
Description Specifies index of the power supply unit.
NOTE:
Indexes from 1 – 8 are supported to support up
to 8 power supply units. If any power supply unit is
not present, cfgServerPowerSupplyOnlineStatus is
absent and for all the other properties, it is 0.
Legal Values Integer from 1 - 8
Default None
cfgServerPowerSupplyMaxInputPower (Read Only)
Description Displays the AC input rated power in Watts.
Legal Values A string of up to 32 characters.
Default 0
cfgServerPowerSupplyMaxOutputPower (Read Only)
Description Displays the AC output rated power in Watts.
Legal Values A string of up to 32 characters.
Default 0
cfgServerPowerSupplyOnlineStatus (Read Only)
Description Displays the status of the power supply unit.
Legal Values
• 0 - Present
• 1 - Absent
• 2 - Failure
• 3 - Predictive failure
Default 0
210