Quick Reference Guide

-4 : show CMC IPv4 information
-6 : show CMC IPv6 information
help and help <subcommand>
Description Lists all the subcommands available for use with RACADM and provides a short description about
each subcommand. You may also type a subcommand, group, object, or FQDD name after help.
Synopsis
• racadm help
• racadm help <subcommand>
• racadm help -g <groupname>
• racadm help -o <objectname>
• racadm help <FQDD Alias>.<Group>
• racadm help <FQDD Alias>.<Object>
• racadm help <FQDD Alias>.<Group>.<
Object>
Input None
Output
• The help
command displays a complete list of subcommands.
• The racadm help <
subcommand > command displays information for the specified
subcommand only.
• The racadm help -g <
groupname > command displays information for the specified group.
• The racadm help -o <
objectname > command displays information for the specified object.
• The racadm help <
FQDD Alias >.< Group >command displays information for the specified
group.
• The racadm help <
FQDD Alias >.< Object > command displays information for the specified
object.
• The racadm help <
FQDD Alias >.< Group >.< Object > command displays information for the
specified object.
Example
racadm help idrac.lcd
racadm help system.power
racadm help system.power.supply
arp
Description Displays the contents of the Address Resolution Protocol (ARP) table. ARP table entries
cannot be added or deleted.
To use this subcommand for CMC, you must have Administrator privilege and for iDRAC,
you must have Execute Diagnostic Commands .
Synopsis
racadm arp
Input None
Example None
Output
IP Address HW Type Flags HW Address Mask Device
192.168.1.1 0x1 0x2 00:00:0C:07:AC:0F * eth0
22