Quick Reference Guide

cfgIpmiSerialBaudRate (Read/Write)
Description Specifies the baud rate for a serial connection over IPMI.
Legal Values 9600, 19200, 57600, 115200
Default 57600
cfgIpmiSerialConnectionMode (Read/Write)
Description When the iDRAC cfgSerialConsoleEnable property is set to
0 (disabled), the iDRAC serial port becomes the IPMI serial
port. This property determines the IPMI defined mode of
the serial port.
In Basic mode, the port uses binary data with the intent of
communicating with an application program on the serial
client. In Terminal mode, the port assumes that a dumb
ASCII terminal is connected and allows very simple
commands to be entered.
Legal Values
• 0 (Terminal)
• 1 (Basic)
Default 1
cfgIpmiSerialChanPrivLimit (Read/Write)
Description Specifies the maximum privilege level allowed on the IPMI
serial channel.
Legal Values
• 2 (User)
• 3 (Operator)
• 4 (Administrator)
Default 4
cfgIpmiSerialFlowControl (Read/Write)
Description Specifies the flow control setting for the IPMI serial port.
Legal Values
• 0 (None)
• 1 (CTS/RTS)
Default 1
223