Quick Reference Guide

cfgSensorRedundancyCapabilities (Read Only)
Description Returns the redundancy capabilities in the form of a
bitmask. This bitmask allows the user to know which
values can be set for cfgSensorRedundancyPolicy.
Legal Values A bit mask. More than 1-bit can be set at a time to indicate
multiple redundancy support.
• 0- N/A, for sytems that are not supported
• 1- Non Redundant
• 2- 1+1 - Redundant
• 4- 2+1 - Redundant
• 8- 2+2 - Redundant
Default 0
cfgSensorRedundancyStatus (Read Only)
Description Indicates the redundancy status. The status is N/A on
platforms that does not support the power supply sensor
redundancy.
Legal Values String:
• N/A
• Full
• Lost
• Degraded
Default None
cfgVFlashSD
This group is used to configure the properties for the Virtual Flash SD card. This group is applicable only for iDRAC.
NOTE:
If the vFlash card is present but is not enabled, the query for any property under this group displays:
ERROR: vFlash is not enabled.
To view the properties of this group, enable the vFlash using the command:
racadm config -g cfgvFlashSD -o cfgvFlashSDEnable 1
The following sections provide information about the objects in the cfgVFlashSD group.
cfgVFlashSDInitialized (Read Only)
Description Displays whether or not an SD card is initialized.
Legal Values
• 0
• 1
228