Quick Reference Guide

• Critical
• Unknown
Default OK
cfgVFlashSDWriteProtect (Read Only)
Description Displays whether the physical write-protect latch on the
vFlash SD card is enabled or disabled.
Legal Values
• 0 (vFlash is not write-protected)
• 1 (vFlash is write-protected)
Default None
cfgVFlashPartition
This group is used to configure properties for individual partitions on the vFlash SD Card. Up to 16 partitions are
supported, indexed from 1 to 16. This group is applicable only for iDRAC.
NOTE:
For SD cards, the index value is limited to 1 because only a single partition of size 256 MB is allowed.
The following sections provide information about the objects in the cfgVFlashPartition group.
cfgVFlashPartitionIndex (Read Only)
Description The index value of the partition.
Legal Values Integer from 1-16
Default None
cfgVFlashPartitionSize (Read Only)
Description Displays the size of the partition.
Legal Values 1 MB to 4 GB
Default None
cfgVFlashPartitionEmulationType (Read/Write)
Description View or modify the emulation type for the partition.
Legal Values String:
• HDD
• Floppy
• CDROM
Default None
230