Quick Reference Guide

– Output:
[root@idrac-
<username>]racadm>
chassisaction
Description Executes a power action on the chassis, iKVM, or a
server.
This subcommand is applicable only for CMC.
To use this subcommand, you must have Chassis Control
Administrator
privilege
Synopsis
racadm chassisaction [-m <module>]
<action>
Input
• -m <
module > — Module on which you want to
carry out the action. Values are:
— chassis - this is the default value if -m is not specified.
— switch-n where n=1–6
— kvm
• <
action > — Action that you want to execute on
the specified module. Values are:
— powerdown — (Chassis only) Powers down the
chassis.
— powerup — (Chassis only) Powers up the chassis.
— powercycle — Power cycles the module.
— nongraceshutdown — (Chassis only) Shuts down the
chassis non-gracefully.
— reset — Performs a hard reset of the module.
When < module
> = kvm or switch, <
action
> must be
powercycle or reset.
Output None
Example Perform a reset of switch-3:
racadm chassisaction -m switch-3 reset
Module power operation successful.
clearasrscreen
Description Clears the last crash (ASR) screen that is in memory.
For more information, see "
Enabling Last Crash Screen "
section in the iDRAC7 User’s Guide .
This subcommand is applicable only for iDRAC.
NOTE:
To use this subcommand, you must have Clear
Logs permission.
Synopsis
racadm clearasrscreen
24