Quick Reference Guide

System.Power.PCIeAllocation (Read or Write)
Description Specifies PCIe power allocation for blade servers. This is applicable only for
Expansler.
NOTE:
This object only applies to servers that support PCIe Card.
Legal Values
• 0 - Disabled,
• 1 - Enabled
Default Value
• 0 — For platforms that do not support PCIe cards.
• 500W — For platforms that support PCIe cards.
Write Privilege Configure iDRAC
License Required iDRAC7 Express or iDRAC7 Enterprise
Dependency None
System.Power.PFCEnable (Read or Write)
Description Enables the power factor correction enable.
NOTE:
• This object is supported only for iDRAC on
Rack and Tower servers.
• This object is applicable only if
System.Power.Cap.Enable is set to 1.
Legal Values
• 0 - Disabled
• 1 - Enabled
Default Value 0 - Disabled
Write Privilege Configure iDRAC
License Required iDRAC7 Express or iDRAC7 Enterprise
Dependency None
System.Power.RedundancyCapabilities (Read Only)
Description Returns the redundancy capabilities in the form of a
bitmask. This bitmask indicates the values that are set by
cfgSensorRedundancyPolicy.
NOTE:
This object is not applicable on iDRAC on
Blade servers.
Legal Values A Bit Mask.
248