Quick Reference Guide

No Core Dump Data is currently available.
• racadm coredump
Feb 19 15:51:40 (none) last message repeated 5
times
Feb 19 15:52:41 (none) last message repeated 4
times
Feb 19 15:54:12 (none) last message repeated 4
times
Feb 19 15:56:11 (none) last message repeated 2
times
Feb 22 11:46:11 (none) kernel:
coredumpdelete
Description Deletes any currently resident coredump data stored in
the RAC.
This subcommand is applicable only for iDRAC.
To use this subcommand, you must have Clear Logs
or
Execute Debug Commands permission.
NOTE:
If a coredumpdelete command is issued and a
coredump is not currently stored in the RAC, the
command displays a success message. This behavior
is expected. See the coredump subcommand for
more information about viewing a coredump.
Synopsis
racadm coredumpdelete
Input None
Output Coredump is deleted.
Example
racadm coredumpdelete
Coredump request completed successfully
deploy
Description Deploys server or IOM by specifying the required properties.
This subcommand is applicable only for CMC.
To use this subcommand, you must have Server Administrator privilege.
NOTE:
Use setniccfg to configure static IP address, subnet mask, and gateway,
as well as DHCP, speed, and duplex properties.
Synopsis
• racadm deploy -m server-<n> -u root -p <password> -
s <ipaddress> <
subnet> <
gateway> -b <device> -o no|
yes
• racadm deploy -m server-<n> -u root -p <password> -
s -6 <ipv6Address> <prefixlen> <gateway> -b
<device> -o no|yes
where <
prefixlen > must be a number between 0 and 128.
29