Quick Reference Guide

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 4.45

• Configure using severity as a parameter. For example, all informational events in

storage category are assigned poweroff as action, and email and snmp as

notifications:

racadm eventfilters set -c idrac.alert.storage.info -

a poweroff -n email,snmp

• Configure using subcategory as a parameter. For example, all configurations

under the licensing subcategory in the audit category are assigned poweroff as

action and all notifications are enabled:

racadm eventfilters set -c idrac.alert.audit.lic -a

poweroff -n all

• Configure using subcategory and severity as parameters. For example, all

information events under the licensing subcategory in the audit category are

assigned poweroff as action and all notifications are disabled:

racadm eventfilters set -c idrac.alert.audit.lic.info

-a poweroff -n none

• Configure the event generation interval for temperature statistics:

racadm eventfilters set -c

idrac.alert.system.tmps.warning -r 10

• Configure the event generation interval and notifications for temperature

statistics:

racadm eventfilters set -c idrac.alert.system.tmps -r

5 -a none -n snmp

• Send a test alert for the fan event:

racadm eventfilters test -i FAN0001

fcstatistics

Description Displays a list of FCs (FQDDs) managed by server for which statistics is available.

This subcommand is applicable only for iDRAC.

Synopsis

racadm fcstatistics <FC fqdd>

Input

<FC fqdd>— Specify the FQDD of the target FC device.

Example

racadm fcstatistics <FC fqdd>

feature

Description Displays all active chassis features. The information displayed includes feature name, date activated,

and the serial number of the SD card used to activate the feature.

Dell Feature Cards may contain more than one feature. After any feature included on a Dell Feature

Card is activated on a chassis, any other features that may be included on that Dell Feature Card

cannot be activated on a different chassis.

This subcommand is applicable only for CMC.

NOTE:

To use this subcommand to deactivate FlexAddress, you must have Chassis Configuration

Administrator privilege. A user with login privileges can view status only.

NOTE:

To deactivate FlexAddress features, the chassis must be turned off.

Synopsis

• racadm feature -s

• racadm feature -d -c <featurename>