Quick Reference Guide

feature card is bound to another
chassis, svctag = ABC1234, SD
card SN = 01122334455
Action: Remove the SD card; locate and install the
SD card for the current chassis.
• The feature card inserted is
valid and contains the following
feature(s) FlexAddress: The
feature card is not bound to any
chassis
Action: The feature card can be moved to another
chassis, or can be reactivated on the current
chassis. To reactivate on the current chassis,
enter
racadm racreset until the CMC module with
the feature card installed becomes active.
Example
$ racadm featurecard -s
The feature card inserted is valid,
serial number TEST0123456789012345678
The feature card contains the
following feature(s):
FlexAddress: The feature is bound to
this chassis
FlexAddressPlus: The feature is bound
to this chassis
ExtendedStorage: The feature is bound
to this chassis
frontpanelerror
Description Hides or shows the live-feed of the errors currently being displayed on the LCD screen.
This subcommand is applicable only for iDRAC.
For error acknowledge use hide. For error assert use
show.
Synopsis
racadm help frontpanelerror show
racadm help frontpanelerror hide
Input
• show — to view the errors currently being displayed on the LCD screen.
• hide — to hide the errors currently being displayed on the LCD screen.
fwupdate
Description Allows you to update the firmware on the iKVM, active CMC, standby CMC, server
iDRACs, or an IOM infrastructure device. You can:
• Check the firmware update process status.
• Update iDRAC or CMC firmware from FTP or TFTP server by providing an IP
address and optional path.
• Update iDRAC or CMC firmware from the local file system using Local and
Remote RACADM.
• Roll back to the standby firmware.
• If CMC firmware version is 2.0 or later and iDRAC firmware version is 1.4, then
this subcommand performs updates to the iDRAC firmware, when the existing
35