Quick Reference Guide

Module ID = ps-6

Severity = Critical

Message = The power input for power supply 6 is lost.

• To display critical error messages for server-1:

racadm getactiveerrors –s critical –m server-1

There are no critical alerts

Module ID = server-1

Severity = Critical

Message = The storage battery has failed.

• The error message displayed for invalid syntax.

racadm getactiveerrors –z cmc-1

ERROR: The syntax of the command specified is not correct.

• The error message displayed for invalid parameter.

racadm getactiveerrors –m server-80

ERROR: The syntax of the command specified is not correct.

• To display entire information log.

racadm getactiveerrors -s info

Module ID = server-1

Severity = Critical

Message = A fabric mismatch deteceted for mezzanine card B1.

Module ID = ps-1

Severity = Critical

Message = The power input for power supply 1 is lost.

Module ID = ps-3

Severity = Critical

Message = The power input for power supply 3 is lost.

Module ID = cmc-1

Severity = NonCritical

Message = A firmware or software incompatibilty detected

between system BIOS in slot 4 and CMC.

getarraycfg

Description This command is applicable only for CMC. Use this command to display the storage

array properties and configuration status.

Synopsis

getarraycfg -m <module> [-s]

Input

• -m — The valid value for

—m <module> is server-n, where n = 1 to 16.

• -s — query for current storage configuration process status.

Output Array configured properties for:

• Member Name

• Member IP

• Group Name

• Group IP

• Fabric Selection