Quick Reference Guide

server-6 Not Present None None
server-7 Not Present None None
server-8 Present LPe1105-M4 None
server-9 Extension(1) None None
server-10 Not Present None None
server-11 Not Present None None
server-12 Not Present None None
server-13 Not Present None None
server-14 Not Present None None
server-15 Not Present None None
server-16 Not Present None None
getflexaddr
Description Displays enabled/disabled status for the entire chassis. If
used with -i, the command displays MACs/WWN on a per
slot basis.
This subcommand is applicable only for CMC.
To use this subcommand, you must have CMC Login User
privilege.
NOTE:
If FlexAddress is not activated on the chassis,
the command displays server-assigned MAC/WWN
addresses. If the slot is empty, the command leaves
the server-assigned MAC/WWN addresses blank. If
an external console controls the MAC/WWN
addresses, the command displays an externally
managed message.
Synopsis
racadm getflexaddr [-i <slotNum>]
Input -i <
slotNum
> — Specifies the slot information to be
displayed. <
slotNum
> can be from 1 to 16.
Output
Example
Example
Display current flex address settings for all slots and fabrics
racadm getflexaddr
<Slot#> <Status> <Server Presence>
1 Enabled Present
47