Quick Reference Guide

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 4.45

getversion

Description Displays the current software version, model and generation information, and whether the target

device can be updated.

To use this subcommand, you must have login user privilege.

Synopsis

• racadm getversion [-b | -c] [-m <

module

• racadm getversion -l [-m <

module

>] [-f <

filter

• racadm getversion

Input

• (none) - Displays the version information for all targets or devices.

• -m <

module

> - Specifies the module or device for which you want to retrieve the version

information.

module

> is one of the following:

– server-nx where

=1-8 ;

= a,b,c,d

– cmc-n where n= 1 or 2. For example, cmc-2.

• -c - Displays the server's current CPLD version.

• -b - Displays the server's current BIOS version (default is iDRAC version).

• -l - Displays the firmware versions of available server components.

• -f <

filter

> - Filters the components. Must be used with -l and be one of the following values:

– bios: BIOS

– idrac: iDRAC

– usc: Lifecycle Controller (Unified Server Configurator)

– diag: 32-bit Diagnostics

– drivers: OS Driver Package

– nic-x: Network Interface card. See -l output for possible values of x

– raid-x: Raid Controller. See -l output for possible values of x

NOTE:

The -b, -c and -l options are not available for CMC modules.

NOTE:

The -l option requires that the Lifecycle Controller service is enabled on the servers. For

version information, see the RACADM Readme available at dell.com/support/manuals.

Example

• racadm getversion

• racadm getversion -f idrac

Example

racadm getversion -m server-1

<server> <iDRAC

version>

server-1 1.40.40

(Build 08)

PowerEdge M520 iDRAC7 Y

server-2 3.50 (Build 2) PowerEdgeM610x iDRAC6 Y