Quick Reference Guide

– CusOsUp
– UEFI_Inventory
– iDRAC
– UEFI_DCS
– SEL
– RACLOG
– DE
– WSMAN
– RACADM
– iDRAC_GUI
• -c — The category used to filter the records. Provide multiple categories using a
"," as the delimiter. The value is case-insensitive. Valid Category values:
– System
– Storage
– Worknotes
– Config
– Updates
– Audit
• -b— The subcategory used to filter the records. Provide multiple subcategories
using
a as the delimiter.
• -q — The sequence number from which the records must be displayed.
NOTE:
This parameter input is an integer. If an alphanumeric input is
provided, then invalid subcommand syntax error is displayed.
• -n — Specifies the n Number of records to be displayed. On Local RACADM, if
this parameter is not specified, by default 100 logs are retrieved.
• -r — Displays events that have occurred after this time. The time format is yyyy-
mm-dd HH:MM:SS. The time stamp must be provided within double quotation
marks.
• -e
— Displays events that have occurred before this time. The time format is
yyyy-mm-dd HH:MM:SS. The time stamp must be provided within double quotation
marks.
• -f <filename> — Specifies the file location and name where lifecycle log is
exported.
• -a <name> — Specifies the FTP Server IP address or FQDN, user name, and
password.
• -d <path> — Specifies the path to the file on the FTP server.
• -l <location> — Specifies the location of the network share or area on file
system where lifecycle log is exported. Two types of network shares are
supported:
– SMB mounted path: //<
ipaddress or domain name >/< share_name >/
< path_to_image >
– NFS mounted path: <
ipaddress >:/< path_to_image >.
• -u <user> — Specifies the user name for accessing the FTP Server, or Domain
and User Name for accessing network share location.
• -p <password> — Specifies the password for accessing the FTP Server or
Share location.
• -s
— The severity used to filter the records. Provide multiple severities using a ","
as the delimiter. The value is case-insensitive. Valid Severity values:
– 1. Warning
87