Quick Reference Guide
Reply from 2011:de11:bdc:194::31: time<1ms
Reply from 2011:de11:bdc:194::31: time<1ms
Ping statistics for 2011:de11:bdc:194::31:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
racdump
Description Provides a single command to get dump, status, and
general iDRAC board information.
For CMC, this subcommand displays the comprehensive
chassis status and configuration state information, as well
as historic event logs. Used for post deployment
configuration verification and during debugging sessions.
To use this subcommand for CMC you must have
Administrator privilege and for iDRAC you must have
Debug
permission.
Synopsis
racadm racdump
Input Racdump includes the following subsystems and
aggregates the following RACADM commands:
• General System/RAC information - getsysinfo
• Session information - getssinfo
• Sensor information - getsensorinfo
• Switches information (IO Module) - getioinfo
• Mezzanine card information (Daughter card) -
getdcinfo
• All modules information - getmodinfo
• Power budget information - getpbinfo
• KVM information - getkvminfo
• NIC information (CMC module) - getniccfg
• Redundancy information - getredundancymode
• Trace log information - gettracelog
• RAC event log - getraclog
• System event log - getsel
Output The following information is displayed when the racdump
subcommand is processed:
• General system/RAC information
• Coredump
• Session information
• Process information
• Firmware build information
Example
94