Quick Reference Guide

<senType> <Num> <sensorName> <

status> <AC-OK status>

PWR 1 PS-1 Online OK

PWR 2 PS-2 Online OK

PWR 3 PS-3 Online OK

PWR 4 PS-4 Slot Empty N/A

PWR 5 PS-5 Failed OK

PWR 6 PS-6 Slot Empty N/A

racreset

Description Resets iDRAC . The reset event is logged in the iDRAC log.

Resets CMC. The reset event is logged in the hardware

(sel) and CMC (RAC) logs.

To use this subcommand for CMC, you must have Chassis

Administrator

privilege and for blade servers, you need

the server administrator privilege. For iDRAC, you must

have Configure iDRAC permission.

NOTE:

When you issue a racreset subcommand,

iDRAC or CMC may require up to two minutes to

return to a usable state.

For CMC only:

NOTE:

There is a 100% fan request when the

command is issued against the servers.

Synopsis For iDRAC only:

racadm racreset soft

racadm racreset hard

racadm racreset soft -f

racadm recreset hard -f

For CMC only: racadm racreset [-m <module>

[-f]]

Input For iDRAC only:

• -f— option is used to force the reset.

For CMC only:

• -m — The values should be one of the following:

– server-n : where n = 1 to 16

– server-nx: where n = 1 to 8; x = a to d

(lower case)

NOTE:

– Multiple modules may be specified,

such as -m <module1> -m

– -f option is used to force the reset

and is available only with an

-m

option.