User Manual

Installing the 2.5-inch drive assembly

1 Insert the drive assembly into the slot on the computer until it clicks into place.

2 Close the front panel door.

3 Connect the SATA cable and the power cable to the connectors on the drive.

4 Install the:

• bezel

• cover

5 Follow the procedure in After Working Inside Your Computer.

Optical drive

Removing optical drive

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a cover

b bezel

3 Open the front panel door.

4 To remove the optical drive assembly:

a Disconnect the data cable and power cable from the connectors on the optical drive [1].

NOTE

: You may need to unroute the cables from the tabs under the drive cage to allow you to disconnect

the cables from the connectors.

b Close the front panel door [2].

Removing and installing components