User Manual
Table 14. Manageability
Option Description
USB provision This option is not selected by default.
MEBx Hotkey This option is selected by default.
Table 15. Virtualization Support
Option Description
Virtualization This option species whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel® Virtualization Technology. Enable Intel Virtualization Technology -
This option is enabled by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by Intel® Virtualization technology for direct I/O. Enable VT for Direct I/O -
This option is enabled by default.
Table 16. Maintenance
Option Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is set by default.
SERR Messages Controls the SERR message mechanism. This option is set by default. Some graphics cards require
that the SERR message mechanism be disabled.
BIOS Downgrade Allows you to control ashing of the system rmware to the previous versions. This option is enabled
by default.
NOTE: If this option is not selected, the ashing of the system rmware to the previous
versions is blocked.
Data Wipe Allows you to securely erase the data from all the available internal storages, such as HDD, SSD,
mSATA, and eMMC. The option Wipe on Next Boot is disabled by default.
BIOS recovery Allows you to recover the corrupted BIOS conditions from the recovery les on the primary hard
drive. The option BIOS Recovery from Hard Drive is selected by default
Table 17. System Logs
Option Description
BIOS Events Displays the system event log and allows you to:
• Clear Log
• Mark all Entries
Table 18. Advanced congurations
Option Description
ASPM
Allows you to activate the state power management.
• Auto (Default)
• Disabled
• L1 Only
62 System setup