User Manual

Figure 1. DOS BIOS Update Screen

Enabling smart power on

To enable Smart Power On and the ability to wake a system from S3, S4, and S5 sleep states with a move of a mouse or press of a key on

the keyboard, perform these steps:

1 Make sure the following BIOS settings under Power Management setup option are set as mentioned here:

• USB Wake Support as Enabled.

• Deep Sleep Control as Disabled.

2 Connect a keyboard, mouse, or wireless USB dongle to the Smart Power On USB port(s) on the back of your system.

3 Disable Fast Startup in the Operating System:

a Search and open Power options in the Start Menu.

b Click Choose what the power buttons do on the left side of the window.

c Under Shutdown settings, make sure Turn on fast startup is disabled.

4 Reboot your system so the changes can take eect. The next time when your system goes to sleep or is shut down, any use of the

mouse or keyboard will wake it up.

System setup