Administrator Guide
The <machinename_domain.com>.exe le is downloaded.
Perform a Recovery
1 Create bootable media of the recovery environment. For instructions, see Appendix A - Burning the Recovery Environment.
NOTE: Disable SecureBoot before the recovery process. When nished, enable
SecureBoot.
2 Boot to that media on a recovery system or on the device with the drive you are attempting to recover.
A WinPE Environment opens.
3 Enter x and press Enter to get to a command prompt.
4 Navigate to the recovery le and launch it.
An Encryption client diagnostic dialog opens and the recovery le is being generated in the background.
Encryption Recovery
General Purpose Key Recovery
49