Administrator Guide
b The select partition 1 command select the new partition.
c Use the following command to quick format the drive with the FAT32 le system: format FS=FAT32 quick.
8 The drive must be marked as a bootable drive. Use the active command to mark the drive as bootable.
9 To move les directly to the drive, assign an available letter to the drive with the assign command.
10 The drive will automatically mount, and the contents of the ISO le can be copied to the root of the drive.
After the ISO contents have completely copied, the drive is bootable and can be used for recovery.
68 Encryption Recovery
Appendix B - Creating Bootable Media