User Manual

34 │ Setting up the monitor
To connect your monitor to the computer:
1.
Turn o your computer and disconnect the power cable.
2.
Connect DP or HDMI or VGA cable from your monitor to the computer.
Connecting your monitor
Connecting DP/VGA cable
E1920H/E2020H/E2220H/E2420H/E2720H
Connecting HDMI/VGA cable
E2420HS/E2720HS
WARNING: Before you begin any of the procedures in this section,
follow the Safety Instructions.
NOTE: Do not connect all cables to the computer at the same time. It is
recommended to route the cables through the cable-management slot
before you connect them to the monitor.
NOTE: Dell monitors are designed to work optimally with Dell supplied inbox
cables. Dell does not guarantee the video quality and performance when
using non-Dell cables.