Product manual

ManualsBrandsDell ManualsserversDell Dell UPS 3750R

Product Requirements

Dell UPS Management Card

M2M XML based protocol to Get / Set parameters

NOTICE TO PERSONS RECEIVING THIS

DRAWING AND/OR TECHNICAL INFORMATION

Eaton Corporation claims proprietary rights to the material disclosed hereon. This drawing and/or technical information is issued

in confidence for engineering information only and may not be reproduced or used to manufacture anything shown or referred to

hereon without direct written permission from Eaton Corporation to the user. This drawing and/or technical information is the

property of Eaton Corporation and is loaned for mutual assistance, to be returned when its purpose has been served.

THIS DRAWING AND/OR TECHNICAL INFORMATION IS THE

PROPERTY OF EATON CORPORATION

INFORMATION SUBJECT TO CHANGE WITHOUT ANY NOTICE

APPROVED BY/DATE

Approval

Signature

Date

Software & Connectivity

Project Leader, MGE – (J. Lecuivre) 12/01/2010

Firmware Engineer – (J.L. Philippe) 12/01/2010

Summary of content (13 pages)

PAGE 1
Product Requirements Dell UPS Management Card M2M XML based protocol to Get / Set parameters Copyright © 2009 Eaton Corporation. All Rights Reserved. NOTICE TO PERSONS RECEIVING THIS DRAWING AND/OR TECHNICAL INFORMATION Eaton Corporation claims proprietary rights to the material disclosed hereon.
PAGE 2
Revision History Rev. Date By Description 0.1 05/15/09 L. Battini 1.0 10/02/10 L. Battini Initial version in order to provide a M2M protocol based on XML. Set Simple request removed (Depreciated) Disclaimer updated 1.1 03/25/10 L. Battini Multi Set Request updated TABLE OF CONTENTS 1. DESCRIPTION ................................................................................................................................... 1 2. WEB SERVICES DESCRIPTOR ..................................
PAGE 3
1. Description The Dell UPS Management Card supports a M2M protocol that allows to ”Get” and or “Set” several parameters. The goal of this document is to describe how the parameters can be Read / Write. It also provides a list of the objects that are currently implemented. 2. Web services descriptor This file provides information about "Card" capabilities and resources location. It's the first entry point of the "Card". It is accessible from the URL: "http://
/product.
PAGE 4
. Get & Set objects feature The Dell UPS Management Card supports the XML protocol over HTTP or HTTPS to set parameters. 4.1. Service This service downloads from the Dell UPS Management Card the values of all parameters and data inside the NMC card. : Attribute Description url Securi ty Indicates the URL to access to the main menu. Indicates the security level available for connection.
PAGE 5
If "∗" suffix is used then the name expression represents all objects whose name begins with prefix. Note: The “*” suffix is implemented only for “UPS.*” and “System.*” objects. 4.1.3. Answer Server response is the same for the both mode. This is an XML file with format: < OBJECT name="Name">Value ... Attribute Description Name Value The object name. The object value. 4.2.
PAGE 6
4.2.1. Multi Set Request The post use a multi-part file upload type field. The field name is "objectList" and is define in the HTML Form as follow: The posted file uses this format: ... and must be named “Configuration.xml”. 4.2.2. Answer The answer is ignored in this mode.
PAGE 7
5. Appendix 1 : product.xml file - -

- PAGE 8
- - - - - - - PAGE 9
PAGE 10
- PAGE 11
- - - - PAGE 12
- - - - - -
7. Appendix 3 : upsprop.xml file -