Setup Guide

Setting up your Dell DL4000 Appliance (continued)
Printed in the U.S.A.
Important Updates
Note: Before installing any updates, complete setting up the DL4000 Appliance.
For latest operating system updates, go to the Microsoft website at • update.microsoft.com.
To reinstall or update Dell software, download the • Dell DL Backup to Disk Appliance Recovery and Update Utility from dell.com/support/downloads.
Documentation
Title Description
Dell DL4000 Appliance Getting Started With
Your System
TheGettingStartedWithYourSystemplacematprovidesanoverviewofsettingupyoursolution,andtechnicalspecications.
This document is shipped with your system and is also available at dell.com/support/manuals.
Dell DL4000 Appliance User’s Guide TheUser’sGuideprovidesinformationonconguring,managing,updating,andrestoringthesystem.Thisdocumentis
available online at dell.com/support/manuals.
Dell DL4000 Appliance Owner’s Manual The Owner’s Manual provides information about solution features and describes how to troubleshoot the system and install or
replace system components.
This document is available at dell.com/support/manuals.
Dell DL4000 Appliance Rack Installation
Instructions
The rack documentation included with your rack solution describes how to install your system into a rack. This document is
shipped with your rack solution and is also available at dell.com/support/manuals.
Dell DL4000 Appliance Release Notes The Release Notes provides information about deploying the appliance using
AppAssure and recovering from failures. This document is available at dell.com/support/manuals.
Dell Dell DL4000 Appliance Interoperability
Guide
The Interoperability Guide provides information about the supported hardware and software versions for the Dell Appliance
system. This document is available at dell.com/support/manuals.
Dell DL4000 Appliance Deployment Guide The Deployment Guide provides information on deploying the hardware and
installing the software on the appliance. This document is available at dell.com/support/manuals.
7 | Launching the console 8 | Additional information
© 2014 Dell Inc.
This product is protected by U.S. and international copyright and intellectual property laws. Dell™ and the
Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names
mentioned herein may be trademarks of their respective companies.
2014 - 10
5 | Connecting the DL4000 system to the PowerVault MD1200 storage
enclosure (optional)
MD1200 storage enclosure (optional)
DL4000 system
PowerEdge RAID controller
MD primary enclosure management module
For redundant path conguration:
Connect one end of each SAS cable to port 0 and port 1 on the DL4000 system PERC controller. 1.
Connect the other end of each SAS cable to the IN port on each Enclosure Management Module (EMM) on the PowerVault MD1200 storage enclosure.2.
For a single path conguration:
Connect one end of the SAS cable to port 0 on the DL4000 system PERC controller. 1.
Connect the other end of the SAS cable to the IN port on the Enclosure Management Module (EMM) on the PowerVault MD1200 storage enclosure.2.
NOTE:Foroptionalcableconguration,seethe Dell DL4000 Appliance Deployment Guide. To locate the primary EMM, see the Dell PowerVault MD1200 Storage Enclosure’s
Owner’s Manual at dell.com/support/manuals.
NOTE: Do not connect tape devices to the PERC controller.
After the AppAssure Appliance Conguration Wizard is
complete, the AppAssure Core Console is displayed.
NOTE: Your system is shipped with a 30-day temporary AppAssure
software license. To obtain permanent license(s), go to
dell.com/DLActivation and complete the registration.
NOTE:YoucannowcongureNICbondingandruntheMicrosoft
Windows update.
6 | Conguring the DL4000 software
Turn on the components in the following order: 1.
a. PowerVault MD1200 storage enclosure
b. DL4000 system and monitor
NOTE: Do not close the AppAssure Appliance Conguration Wizard.
The DL4000 system prompts you to change the password.2.
Afterthepasswordisconrmed,theAppAssure Appliance
Conguration Wizard is displayed.
NOTE: Do not close the AppAssure Appliance Conguration Wizard. Do
not make any hardware or software changes until the Wizard is complete.
CompleteallstepsinthewizardbeforeconguringNICbondingand
running the Microsoft Windows update.
Click 3. Next and follow the instructions on the screen to
completethesoftwareconguration.
For more information, see the Dell DL4000 Appliance Deployment Guide
at dell.com/support/manuals.