Administrator Guide

Parameter Name Description Valid Values
-emm Represents target EMM WWN or EMM Index
-file Represents target firmware file for updating a
drive or EMM
Firmware update file location
and name
Table 3. Description of values for parameters
Description Valid for Parameter
Absolute Path to Firmware
File
Represents the absolute filepath to a valid
drive or EMM firmware file
Valid value for –file
parameter
Adapter Index
Represents the enumerated index value for
installed supported HBAs
Valid value for –a parameter
SAS WWID
Represents the device specific SAS WWID of
the installed supported HBAs
Valid value for -a parameter
Device ID
Enumerated reference value that represents
a target drive or EMM
Valid value for -d and -emm
parameters
Drawer Index
Represents reference value for logical
grouping of drives into drawers
Valid value for -w parameter
Encl Index (Enclosure
Index)
Represents reference value for enclosures
attached to a specified adapter
Valid value for -enc
parameter
WWN (Worldwide Name)
Represents unique value that identifies a
unique drive, EMM, or enclosure
Valid value for -d,-emm, and
–enc parameters
Enclosure Slot Index Reference value that represents a target
drive
Valid value for -d and -s
parameter
Drawer Slot Index Represents reference value for a drive slot in
a specified drawer
Valid value for -d parameter
EMM Index (Enclosure
Management Module
Index)
Represents the reference value for EMMs in
an specific enclosure
Valid value for -emm
parameter
StartDate Starting date to view logs in the format of
MM/DD/YY
Valid value for -startDate
EndDate End date to view logs in the format of
MM/DD/YY
Valid value for -endDate
EventType Type of event to view (INFO, CRITICAL,
ERROR, or WARN)
Valid value for -event
LatestEventCount Numeric value between 1–1000 Valid value for -count
SupportedOutputFormats Supported out file formats: xml and json Valid value for -
outputformat
Serial Number
Unique identifier for the physical disk drive.
Valid value for -d
15