Administrator Guide

Parameter Description

• Drive OS Path - Can be used anytime.

-off

Disable the blink mode for the device by running

the command.

-h

Provides more information about the command,

description, and usage.

Command examples

• blink drive -a = 1 -enc = 1 -w = 0 -d = 4

• blink drive -a = 1 -enc = 1 -d = //./PHYSICALDRIVE50 -off

• blink drive -a = 500abcdefgh12345 -enc = 1 -w = 0 -d = 4

• blink drive -d = 500a123456789012

Drive power

Description

Turns off or turns on of the drive in the specified enclosure slot number.

Command syntax

secli (drive power | drivepower | dp) (-a=<(SAS WWID | AdapterIndex)> -

enc=<(WWN | EnclIndex)> -s=<EnclosureSlotIndex> [-on | -off] | [-h])

Parameters

Table 5. Drive power status

Parameter Description

-a

Specify the adapter used for the command. This

can be either SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This

can be either WWN or EnclIndex.

-s

Specify the Enclosure Slot Index used for the

command. This is retrieved by the list drives

or info drive command.

-on

Turns on the drive on the specified enclosure slot.

-off

Turns off the drive on the specified enclosure slot.

-h

Provides additional information about the

command, description, and usage.