Administrator Guide

List commands

List adapters

Description

This command lists the adapters accessible from the host.

Command syntax

secli (list adapters | listadapters | la) [-

outputformat=<SupportedOutputFormats>] [-h]

Parameters

Table 6. List adapters

Parameter Descrition

-h

Provides more information about the command,

description and usage.

-outputformat

You can specify the following output formats: xml

or json

List physical enclosures

Description

Shows the list of physical enclosures and related information for the specified adapter. Default output (no

adapter input specified) lists all enclosures accessible by every supported adapter in the local system.

Command syntax

secli (list physical enclosures | list enclosures | listphysicalenclosures |

lpe)[-a=<(SAS WWID | AdapterIndex)>] | [-h]

Parameters

Table 7. List physical enclosure

Parameter Description

-a

Specify the adapter used for the command. This is

either SAS WWID or AdapterIndex.

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.