Administrator Guide

Command syntax

secli (list emms | listemms | le) (-a=<(SAS WWID | AdapterIndex)> [-enc=<(WWN |

EnclIndex)>] [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 9. List EMMs

Parameter Desription

-a

Specify the adapter used for the command. This is

either SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This

is either WWN or EnclIndex.

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

Command examples

• list emms -a = 1

• list emms -a = 1 -enc = 0

• list emms -a = 500abcdefgh12345

• list emms -enc = 500a123456789012 -outputformat = xml

List drawers

Description

This command lists the drawers accessible from the specified enclosure. Depending on your enclosure,

you may have one drawer or multiple drawers.

Command syntax

secli (list drawers | listdrawers | ldraw) (-a=<(SAS WWID | AdapterIndex)> -

enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-