Administrator Guide

Command syntax

secli (list drive slots | listdriveslots | lds) (-a=<(SAS WWID | AdapterIndex)>

-enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] [-verbose] | -

enc=<WWN> [-outputformat=<SupportedOutputFormats>] [-verbose] | [-h])

Parameters

Table 12. List hard disk drive slots

Parameter Description

-a

Specify the adapter used for the command. This

can be either SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This

is either WWN or EnclIndex.

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

Command examples

• list drive slots -a = 1 -enc = 500a123456789012

• list drive slots -a = 1 -enc = 0

• list drive slots -enc = 500a123456789012 -outputformat = xml

• list drive slots -a = 1 -enc = 500a123456789012 -verbose

List fans

Description

This command lists the fans accessible from the specified enclosure.

Command syntax

secli (list fans | listfans | lf) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |

EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])