Administrator Guide

Parameter Description

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

Command examples

• list fans -a = 1 -enc = 500a123456789012

• list fans -a = 1 -enc = 0

• list fans -enc = 500a123456789012 -outputformat = xml

List power supplies

Description

This command lists the power supply units (PSUs) accessible from the specified enclosure.

Command syntax

secli (list power supplies | listpowersupplies | lps) (-a=<(SAS WWID |

AdapterIndex)> -enc=<(WWN | EnclIndex)> [-

outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 14. List power supply devices

Parameter Description

-a

Specify the adapter used for the command. This

can be either SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This

is either WWN or EnclIndex.

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

Command examples

• list power supplies -a = 1 -enc = 500a123456789012

• list power supplies -a = 1 -enc = 0

• list power supplies -enc = 500a123456789012 -outputformat = xml

List temperature sensors

Description

This command lists the temperature sensors accessible from the specified enclosure.