Administrator Guide

Command syntax

secli (list failed drives | lfd) ([-a=<(SAS WWID | AdapterIndex)>] [-enc=<(WWN

| EnclIndex)> [-w= <DrawerIndex>]] [-outputformat=<SupportOutputFormats>] [-

verbose] | -enc=<WWN> [-outputformat=<SupportedOutputFormats>] [-verbose] | [-

h])

Parameters

Table 18. List failed drives

Parameter Description

-a

Specify the adapter used for the command. This is

either SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This

is either WWN or EnclIndex.

-w

Specify the drawer index used for the command.

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

Command examples

• list failed drives

• list failed drives –a=0

• list failed drives –enc=500a123456789012

Informational commands

Show adapter information

Description

This command provides information about the specified adapter and status or count of the attached

devices.

Command syntax

secli (info adapter | infoadapter | ia) (-a=<(SAS WWID | AdapterIndex)> [-

outputformat=<SupportedOutputFormats>] | [-h])