Administrator Guide

Parameters
Table 19. Adapter information
Parameter Decription
-a
Specify the adapter used for the command. This is
either SAS WWID or AdapterIndex.
-h
Provides more information about the command,
description, and usage.
-outputformat
You can specify the following output formats: xml
or json.
Show drive information
Description
This command provides detailed information for the specified HDD.
Command syntax
secli (info drive | infodrive | id) (-a=<(SAS WWID | AdapterIndex)> [-enc=<(WWN
| EnclIndex)> [-w=<DrawerIndex>]] -d=<(WWN | EnclosureSlotIndex |
DrawerSlotIndex | Serial Number | Drive OS Path)> [-
outputformat=<SupportedOutputFormats>] [-smart] | -d=<(WWN | Serial Number |
Drive OS Path [-outputformat=<SupportedOutputFormats>>)] [-smart] | [-h])
Parameters
Table 20. Drive information
Parameter Description
-a
Specify the adapter used for the command. This is
either SAS WWID or AdapterIndex.
-enc
Specify the enclosure used for the command. This
is either WWN or EnclIndex.
-w
Specify the drawer index used for the command.
-d
Specify the hard disk drive used for the command.
This can be any of the following:
• WWN — Can be used anytime.
• Serial Number — Can be used anytime.
• Drive OS path — Can be used anytime.
• Drawer Slot Index (Index of the drive in the
specific drawer) — Use if drawer argument is
used for the command.
• Enclosure Slot Index — Use if drawer argument
is not being used for the command
-outputformat
You can specify the following output formats: xml
or json.
31