Administrator Guide

Parameters

Table 25. Update EMM firmware

Parameter Description

-a

Specify the adapter used for the command. This

can be either SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This

can be either WWN or EnclIndex

-emm

Specify the EMM used for the command.

-file

Specify the file at the given path used for the

command.

-h

Provides additional information about the

command, description and usage.

-wait

If supplied, the application will wait to return until

after the updated EMM comes back online.

NOTE: If the file name contains special characters. You must enclose the file path within escaped

double quote characters.

Command examples

• update emm -a = 500abcdefgh12345 -enc = 1 -emm = 0 -file = C:\Users

\Administrator\firmwares\emm_upgrade.esm

• update emm -enc = 500rg67890123456 -emm = 500a123456789012 -file = C:\Users

\Administrator\firmwares\emm_upgrade.esm

• update emm -emm = 500a123456789012 -file = C:\Users\Administrator\firmwares

\emm_upgrade.esm

Update Adapter

Description

This command updates the firmware version of the adapter using the provided firmware file. The integrity

of the firmware file will be verified before applying the firmware.

Command syntax

secli (update adapter | updateadapter) ( -a=<(SAS WWID | AdapterIndex)> -

file=<FW.FilePath> | [-h])

Parameters