Administrator Guide

Drawers

Provides information about all drawers in a specified enclosure:

[base_url]/a/<(index | wwid)>/enclosures/<(index | wwid)>/drawers

Fans

Provides information about all fans in a specified enclosure:

[base_url]/a/<(index | wwid)>/enclosures/<(index | wwid)>/fans

Power supply units

Provides information about all PSUs in a specified enclosure:

[base_url]/a/<(index | wwid)>/enclosures/<(index | wwid)>/powersupplies

Voltage sensors

Provides information about all voltage sensors in a specified enclosure:

[base_url]/a/<(index | wwid)>/enclosures/<(index | wwid)>/voltagesensors

Current sensors

Provides information about all EMM slots in a specified enclosure:

[base_url]/a/<(index | wwid)>/enclosures/<(index | wwid)>/currentsensors

Device actions

Certain devices can have actions performed on them such as updating firmware or blinking a drive’s LED.

Also, firmware files can be validated. These device actions require additional options at the end of the

URL for a device inventory query:

[base_url]/<item_group>/<(index | wwid)>/?action=<whattodo>&<option>=<opt>

The additional options to the URL for device actions are described here:

• ?action=<whattodo> - what action to perform: update, blink, or get.

• <option> = <opt> - an argument for the action to be performed.

Following are the options available:

• For updates, File=<file>; for example, ?action=update&File=file.fwh

• For blinking drives, toggle=ON/OFF -; for example, ?action=blink&toggle=ON

Specifying file paths

File paths in Windows can either be percent encoded or entered with forward slashes. The following are

examples of valid Windows filepaths for a firmware file: